Tenda A33 AX3000 WiFi 6 Gigabit Range Extender with Dual Antennas

Boost your existing WiFi network with the Tenda A33. This WiFi-6 (802.11ax) extender delivers blazing dual-band throughput — up to 2402 Mbps on 5 GHz plus 574 Mbps on 2.4 GHz — to ensure smooth streaming, gaming, and high-speed browsing in rooms that normally suffer from weak signal. Equipped with two high-gain external antennas and support for 160 MHz bandwidth, it pushes strong, stable wireless coverage into farther corners of your home.

Setup is effortless: plug it into any outlet, join your current network via WPS or the web interface, and let the smart LED signal indicator guide you to the optimal placement. The built-in Gigabit Ethernet port lets you connect wired devices when needed, and AP mode lets you use it more covertly when a wired backhaul exists. The result is reliable full-home WiFi without replacing your main router.

---

Key Features

• Dual-band AX3000 speed: ~2402 Mbps on 5 GHz + ~574 Mbps on 2.4 GHz

• Two external antennas for improved range and better wall penetration

• Support for 160 MHz channel bandwidth for faster wireless performance

• Gigabit Ethernet port for wired connectivity of smart TVs, consoles, etc.

• AP mode + Repeater mode so you can tailor connection based on setup

• Smart LED indicator helps position the extender in the best place

• Easy setup via WPS or browser interface

• Modern WiFi-6 technologies: better efficiency, support for more devices with less interference

---

Specs

• WiFi Standard: IEEE 802.11ax / 802.11a/b/g/n/ac (dual-band concurrent)

• Maximum Data Rates: ~2402 Mbps (5 GHz); ~574 Mbps (2.4 GHz)

• Antennas: 2 external omni-directional antennas

• Ethernet Port: 1 × Gigabit RJ-45

• Modes: Repeater (extends wireless), Access Point (uses wired connection)

• LED Indicator: Signal strength/status LED to guide placement

• Security: WPA-PSK / WPA2-PSK encryption

• Button: WPS / Reset button

• Transmission Power: typical regulatory limits (approx. < 20-23 dBm depending on band)

• Operating Temperature: approx. 0 °C to 40 °C

• Storage Temperature: approx. -40 °C to 70 °C

• Humidity: standard indoor non-condensing ranges